Important Safety Instructions; Important Notice; Storage Instructions - AMX NXA-UPS1500 UNINTERRUPTIBLE POWER SUPPLY Manual

Us version (110 vac), int’l version (220 vac)
Hide thumbs Also See for NXA-UPS1500 UNINTERRUPTIBLE POWER SUPPLY:
Table of Contents

Advertisement

IMPORTANT SAFETY INSTRUCTIONS

Important Notice

Storage Instructions

For extended storage through moderate climate, the batteries should be charged for 12 hours every 3
months by plugging the UPS power cord into the wall receptacle and turn on input breaker on front
panel.
Repeat this procedure every 2 months under high temperature environment.
NXA-UPS1500 Uninterruptible Power Supply
The UPS has its own internal energy source (battery). Should the battery be switched on when
no AC power is available, there could be voltage at the output sockets.
Make sure that the AC Utility outlet is correctly grounded.
Do not open the case, as there are no serviceable parts inside. Your warranty will be void.
Please make sure that the input voltage of the UPS matches the supply voltage.
To eliminate any overheating of the UPS, keep all ventilation openings free from obstruction,
and do not store "things" on top of the UPS. Keep the UPS 30cm away from the wall.
Make sure the UPS is installed within the proper environment as specified (0-40° C and 30-
90% non-condensing humidity).
Do install the UPS in direct sunlight.
Install the UPS indoors as it is not designed for installation outdoors.
Dusty, corrosive and salty environments can do damage to any UPS.
Install the UPS away from objects that give off excessive heat and areas that are excessively
wet.
The battery will discharge naturally if the system is unused for any length of time.
It should be recharged every 2-3 months if unused. When installed and being used, the
batteries will be automatically recharged and kept in top condition.
Do not install the UPS in an environment with sparks, smoke or gas.
Make sure the UPS is completely turned off when moving the UPS from one place to another.
It might cause electrical shock if the output is not cut completely.
IMPORTANT SAFETY INSTRUCTIONS
5

Advertisement

Table of Contents
loading

Table of Contents