Installation; Connect Utility And Load - AMX NXA-UPS1500 UNINTERRUPTIBLE POWER SUPPLY Manual

Installation

Connect Utility and Load

First, connect the UPS with Utility, then plug the loads into the Outlets on the rear of the UPS (FIG. 13).
To use the UPS as a master "On/Off" switch, make sure that all of the loads are switched "on".
These UPS outlets provide battery backup and surge protection to the equipment when Utility voltage is
out of window.
FIG. 13 Plug The Loads Into the UPS
Do not connect a laser printer to the UPS outlets!
NXA-UPS1500 Uninterruptible Power Supply
Installation
13