AMX I!-PCLINK WEB Instruction Manual page 14

Running i!-PCLink/Web
You must add the IP address of the i!-PCLink/Web PC to the URL list of the NetLinx master (using
NetLinx Studio).
System Address
reflects the value
set in the Device
Addressing tab
Used to obtain an
existing URL
List from Master
Used to set the
URL List
on Master
FIG. 8 URL List dialog
8
i. Establish a vaild connection to a master via NetLinx Studio.
ii. Select the OnLine Tree tab from the Workspace window.
iii. Select Diagnostics > URL Listing from the Main menu (FIG. 8).
iv. Enter the System and Device number for the specific Master associated with your
PC (as seen in the Online Tree tab).
v. Click Add and enter the IP Address of the PC into the Add URL dialog box.
vi. Click OK to enter your IP Address and add it to the list.
vii. Click Done once you are finished adding your panel information to the list.
viii. Press the on-screen Reboot button to save any changes and restart the panel.
i!-PCLinkWeb