Pcs And Axlink Data And Power Connections; Pcs And 12 Vdc Power Supply Connections - AMX AXB-TCTCR TELEVISION CONTROLLERRECEIVER Instruction Manual

Use the 12 VDC power supply when the distance between the AMX system and television
controller exceeds the limits described in the Wiring Guidelines table on page 7.
Make sure to connect only the GND wire on the AXlink connector when using a 12
VDC power supply. Do not connect the PWR wire to the AXlink connector's PWR
opening.

PCS and Axlink data and power connections

Connect the PCS Power Current Sensor to the TV Sensor connector, on the rear panel of the
television controller (FIG. 8) to detect and control the television power status (on or off).
Television
Controller
FIG. 8 PCS and AXlink data and power wiring diagram

PCS and 12 VDC power supply connections

Connect the PCS to the TV Sensor connector, on the rear panel of the television controller, and the
optional 12 VDC power supply, as shown in FIG. 9, to detect and control the television power
status (on or off).
Television
Controller
FIG. 9 PCS and optional 12 VDC power supply wiring diagram
AXB-TC and AXB-TCR Television Controllers
12 VDC
PWR
connector
GND
PWR
AXP
AXlink
connector
AXM
GND
TV SENSOR
GND
connector
SEN
12 VDC
PWR
connector
GND
PWR
AXP
AXlink
connector
AXM
GND
TV SENSOR
GND
connector
SEN
Installation and Wiring
no connection
PWR
PCS
AXP
Power Supply Sensor
AXM
GND
12 VDC
PWR
power supply
GND
PWR
PCS
AXP
Power Supply Sensor
AXM
GND
9