Emission Data; Emission Control; Packing List - Echo CS-400 - 04-09 Instruction Manual

EMISSION CONTROL

)
EvAPORATIvE
EPA Phase 2 / C.A.R.B. TIER III
The emission control system for the engine is EM/
TWC (Engine Modification and 3-way Catalyst) and
for the fuel tank the Control System is EVAP (Evapo-
rative Emissions) or N (for nylon tank). Evaporative
emission may be applicable to California models only.
An Emission Control Label is located on the en-
gine. (This is an EXAMPLE ONLY, information on
label varies by engine FAMILY).
PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD)
The 300 hour emission compliance period is the time span selected by the manufacturer certifying the
engine emissions output meets applicable emissions regulations, provided that approved maintenance
procedures are followed as listed in the Maintenance Section of this manual.
The ECHO product you purchased has been fac-
tory pre-assembled for your convenience. Due to
packaging restrictions, guide bar and saw chain
installation and other assembly may be necessary.
ECHO chain saw
Instruction manual
INSTRUCTION MANUAL
CHAIN SAW
CS-400
WARNING
Read the instructions carefully and follow the rules for safe
operation.
Failure to do so could result in serious injury.
ECHO, INCORPORATED
X750-009 68 1
400 Oakwood Road, Lake Zurich, Illinois 60047-1564
Phone : 847-540-8400 X750 325-060 1
Printed in Japan 0802MGrh 0098 ES
Limited warranty state-
ment
E
MISSION
(
&
ExhAUST

PACKING LIST

Safety manual
Warranty registration
card
7
D
ATA
IMPORTANT ENGINE INFORMATION
ENGINE FAMILY: 9ExhS.0404KB DISPLACEMENT: 40.2
EMISSION COMPLIANCE PERIOD : 300 hRS.
ThIS ENGINE MEETS U.S. EPA PhASE 2 EMISSION REGULA-
TIONS FOR S.O.R.E. REFER TO OWNER'S MANUAL FOR
MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.
IMPORTANT ENGINE INFORMATION
ENGINE FAMILY: 9ExhS.0404KB DISPLACEMENT: 40.2
EMISSION COMPLIANCE PERIOD : 300 hRS.
ThIS ENGINE MEETS U.S. EPA Ph2 Exh AND 2007 AND LATER
CALIFORNIA Exh AND EvAP EMISSION REGULATIONS FOR
S.O.R.E. REFER TO OWNER'S MANUAL FOR MAINTENANCE
SPECIFICATIONS AND ADJUSTMENTS.
After opening the carton, check for damage. Im-
mediately notify your retailer or ECHO dealer of
damaged or missing parts. Use the packing list to
check for missing parts.
T-wrench
ECHO Power Blend X™
2-stroke oil sample
Guide bar
Saw chain
CC
CC
Kick Guard®
CS-400