Frequency/Voltage Control - TYAN TRINITY 510 Manual

3.12 Frequency/Voltage Control

Options related to Frequency and voltages can be altered through the following.
CPU Clock Ratio
Auto Detect PCI/DIMM Clk
Spread Spectrum
CPU host/3V66/PCI Clock
Note: Although user-adjustable speed settings are provided,
TYAN does not support anything other than the default
speeds that the motherboard and processor were designed
3.13 Exit
Options related exiting and saving can be done using the following.
Save & Exit
Exit Without Saving
Load Setup Defaults
Load Fail-Safe Defaults
Load Optimized Defaults
Auto
1x, 1.5x, 2x... 20x
Enabled
Disabled
Enabled
Disabled
Default
100/66/33MHz
103/69/34MHz
107/71/36MHz
110/73/37MHz
to operate at.
26
http://www.TYAN.com
Sets the CPU multiplier.
TYAN does not
recommend changing this
setting from the default
setting.
Sets the BIOS to
automatically adjust CPI
and memory bus speeds
accordingly.
Reduces interference on
the motherboard. Leave as
default if your system
works correctly.
Please leave as default.
Overclocking is not
recommended by TYAN.
Exit and save options.
Exit but don't save options.
Discard any changes
made.
Discard any changes made
but use stable options.
Discard any changes made
but use optimal options.