Table of Contents
Advertisement
3.7 Frequency/Voltage Control
Options related to Frequency and voltages can be altered through the following.
Warning: The following options are to be changed only by a certified technician or at
T yan's discretion. Damage to your processor, motherboard, memory, or any other device
in your system can be caused by mishandling the following settings.
CPU Clock Ratio
Auto Detect PCI/DIMM Clk
Spread Spectrum
CPU Clock
CPU Voltage Regulator
AGP Voltage Regulator
DRAM Voltage Regulator
3.8 Exit
Options related exiting and saving can be done using the following.
Save & Exit
Exit Without Saving
Load Setup Defaults
Load Fail-Safe Defaults
Load Optimized Defaults
Auto
16X... 22x
Enabled
Disabled
Enabled
Disabled
100 – 132MHz
This option allows you to change the default core voltage of the
processor. Please always leave at default settings.
This option allows you to change the voltage of the AGP slot.
Some graphics cards may operate better at a slightly higher
voltage than default. For all purposes, please leave this setting
at its default.
This option allows you to change the voltage supplied to main
memory (your memory slots). Because memory modules are
sensitive, please leave this option as default.
26
http://www.tyan.com
Sets the CPU multiplier.
TYAN does not recommend
changing this setting from the
default setting.
Sets the BIOS to
automatically adjust CPI and
memory bus speeds
accordingly.
Reduces interference on the
motherboard. Leave as
default if your system works
correctly.
Enter a decimal number to
set the front side bus speed
of the motherboard. For all
purposes and to maintain
stability, please keep this
setting at its default setting.
Exit and save options.
Exit but don't save options.
Discard any changes made.
Discard any changes made
but use stable options.
Discard any changes made
but use optimal options.
Advertisement
Table of Contents
