Bios Security Menu - TYAN TOMCAT K8S Manual

Feature
Quick Boot Mode
Quiet Boot
Quick Boot Add On ROM
Display Mode
Boot up Number-Lock
PS/2 Mouse Support
Typematic Rate
System Keyboard
Parity Check
Boot To OS/2
Wait for "F1" If Error
Hit "Del" Message Display
Interrupt 19 Capture
3.07 – BIOS Security Menu
The system can be configured so that all users must enter a password every time the system boots
or when BIOS Setup is entered, using either the Supervisor password or User password. The
Supervisor and User passwords activate two different levels of password security. If you select
password support, you are prompted for a one to six character password. Type the password on
the keyboard. The password does not appear on the screen when typed. Make sure you write it
down. If you forget it, you must clear CMOS and reconfigure.
Option
Enabled
This option allows user bypass BIOS self
test during POST
Disabled
Enable this option to hide BIOS Post
Disabled
messages during POST
Enabled
Allows user to force BIOS/Option ROM
Force BIOS
of add on cards to be displayed during
Keep Current
quiet boot
On Choose status of keyboard NUM LOCK
key
Off
Enabled
Allows user to choose status of PS/2
mouse support
Disabled
Fast
Choose the speed at which keys are
repeated
Slow
Present Allows user to disable all system
keyboards
Not-Present
Disabled
Enables system parity check
Enabled
No Set this option to yes only if booting to
OS/2
Yes
Allows user to disable the "Press F1 to
Enabled
Continue" error message when error is
Disabled
detected
Allows user to disable the "Press DEL to
Enabled
enter setup" message during POST
Disabled
Allows devices (such as network card) to
Disabled
capture INT19 for booting
Enabled
43
http://www.TYAN.com
Description