TYAN TOMCAT K8S Manual page 26

Simply find the appropriate slot for your add-in card and insert the card firmly. Do not force any
add-in cards (or anything else) into any slots if they won't seat in place. It's better to try another slot
or return the faulty card rather than damaging both the motherboard and the add-in card.
TIP: It's good practice to install add-in cards in a staggered manner, rather than directly adjacent to
each other. This allows air to more easily circulate within the chassis, providing improved cooling
for all installed devices.
YOU MUST ALWAYS unplug the power connector to the motherboard
NOTE before performing system hardware changes, to avoid damaging the
board or expansion device.
26
http://www.TYAN.com