Installing Add-In Cards - TYAN TOMCAT I7230B Manual

2.8 - Installing Add-In Cards

Before installing add-in cards, it's helpful to know if they are fully compatible
with your motherboard. For this reason, we've provided the diagrams below,
showing the slots that appear on your motherboard.
PC I-X (6 4/13 3)
PC Ie ( x4)
The PCIe (x4) slot is designed for the Tyan M2082-2 riser card only. The
M2082-2 allows you to install a PCI-E (x8) card. Please install the M2082-2
into the indicated PCI-X and PCIe slots. While using the M2082-2 for PCI-E
capabilities, you can not use the PCI-X slot for an additional PCI-X add-in
card.
PCI IDESELs and IRQ Assignments
Slot or Device
PCI-X
SODIMM
Onboard
82551
Onboard
XG20
YOU MUST ALWAYS unplug the power connector from the
motherboard before performing system hardware changes.
NOTE
Otherwise you may damage the board and/or expansion
device.
M2082-2
IDSEL# Bus#
PAAD19 PCI-X Bus
PAAD22 PCI-X Bus
AD18 PCI Bus
AD21 PCI Bus
29
http://www.tyan.com