Connecting External Devices - TYAN TOMCAT I7230B Manual

Removal of a SO-DIMM card is a reversal of the installation procedure. Push
out the spring levers as shown and pull the card out of the socket.
The SO-DIMM expansion cards will fit in the slot only one way. Make sure that
you align the slot in the card with the key in the card slot.

2.10 - Connecting External Devices

The following diagrams will detail the rear port stack for this S5161 motherboard:
PS/2
Mouse/Keyboard
USBx2 +
LAN Stacked
Serial Port
NOTE: Peripheral devices can be plugged straight into any of these ports but
software may be required to complete the installation.
VGA Port
31
http://www.tyan.com
Gigabit
Ethernet x 2