Installing Add-In Cards - TYAN S5556 Manual

2.11 Installing Add-In Cards

Before installing add-in cards, it's helpful to know if they are fully compatible with
your motherboard. For this reason, we've provided the diagrams below, showing
the slots that may appear on your motherboard.
PCI-Express x8 (J53)
PCI-Express x16 (J55)
NOTE: J55 does not support standard PCIE card. It supports M5556-L16-2F riser
card only.
Simply find the appropriate slot for your add-in card and insert the card firmly. Do
not force any add-in cards into any slots if they do not seat in place. It is better to try
another slot or return the faulty card rather than damaging both the motherboard
and the add-in card.
TIP: It's a good practice to install add-in cards in a staggered manner rather than
making them directly adjacent to each other. Doing so allows air to circulate within
the chassis more easily, thus improving cooling for all installed devices.
NOTE: You must always unplug the power connector to the motherboard before
performing system hardware changes to avoid damaging the board or expansion
device.
36
http://www.tyan.com