Dram Installation - TYAN TOMCAT I II Manual

3.10 DRAM Installation

The S1562 uses a 64-bit data path from memory to CPU and can
accommodate up to 512 MB of RAM. The mainboard supports
standard, EDO (Extended Data Out) and ECC(Error Correcting Code)
72 pin SIMMS . All installed memory will be automatically detected so
there is no need to set jumpers.
wSIMM modules must be installed in pairs.
wEach pair of SIMMs must be of the same size and type.
wThe mainboard supports 1, 2, 4, 8 and 16MBx32 SIMMS.
wThe table below shows some of the available memory configurations.
Bank0 Bank1 Bank2
1MB*2 (1MB*2) (1MB*2) (1MB*2)
1MB*2 (2MB*2) (2MB*2
1MB*2 (4MB*2) (4MB*2)
1MB*2 (8MB*2) (8MB*2) (8MB*2)
1MB*2 (16MB*2) (16MB*2) (16MB*2)
1MB*2 (32MB*2) (32MB*2) (32MB*2)
1MB*2 (64MB*2) (64MB*2) (64MB*2)
2MB*2 (1MB*2) (1MB*2)
2MB*2 (2MB*2) (2MB*2) (2MB*2)
2MB*2 (4MB*2) (4MB*2) (4MB*2)
2MB*2 (8MB*2) (8MB*2) (8MB*2)
2MB*2 (16MB*B) (16MB*2) (16MB*2)
2MB*2 (32MB*2) (32MB*2) (32MB*2)
2MB*2 (64MB*2) (64MB*2) (64MB*2)
S1562-001-01
Total Memory In Bank
Bank3 0 0&1 0,1&2 Total
2MB 4MB
(2MB*2) 2MB 6MB
4MB*2) 2MB 10MB
2MB 18MB
2MB 34MB
2MB 66MB
2MB 130MB 258MB 386MB
1MB*2) 4MB 6MB
4MB 8MB
4MB 12MB
4MB 20MB
4MB 36MB
4MB 68MB
4MB 132MB 260MB 388MB
14
6MB 8MB
10MB 14MB
18MB 26MB
34MB 50MB
66MB 98MB
130MB 194MB
8MB 10MB
12MB 16MB
20MB 28MB
36MB 52MB
68MB 100MB
132MB 196MB