Storing The Strongest Broadcast; Switching The Seek Mode; Tuning In Strong Signals; Switching The Reception Mode - Pioneer AVIC-Z110BT Operation Manual

Chapter
16 HD RadioäReception
= For details, refer to this page.

3 Tuning in strong signals

= For details, refer to this page.

4 Switching the reception mode

= For details, refer to this page.

Storing the strongest broadcast

frequencies
"BSM" (best stations memory) lets you auto-
matically store the six strongest broadcast fre-
quencies under the preset tuning keys [P1] to
[P6] and, once stored there, you can tune in to
these frequencies with the touch of a key.
% Touch [Start] to turn BSM on.
BSM begins to flash. While BSM is flashing,
the six strongest broadcast frequencies will be
stored under the preset tuning keys [P1] to
[P6] in order of their signal strength. When
this is complete, BSM stops flashing.
p To cancel the storage process, touch
[Stop].
p Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have already saved by using [P1] to [P6].

Switching the seek mode

You can select the method of seek tuning.
% Touch [Seek] to select the desired set-
ting.
! [All]:
Seeks stations from both analog and digital
broadcasting.
! [HD]:
Seeks from digital broadcasting only.
p If you select "HD" on this setting while
[Blending] is set to "Analog", the setting
on [Blending] turns to "D/A Auto" automa-
tically.
Tuning in strong signals
Local seek tuning allows you to tune in only
those radio stations with sufficiently strong
signals for good reception.
1 Touch [On] to turn local seek tuning on.
To turn local seek tuning off, touch [Off].
112
En
2 Touch [cPrev] or [Nextd] to set the sen-
sitivity.
There are four levels of sensitivity for FM and
two levels for AM:
FM: 1 — 2 — 3 — 4
AM: 1 — 2
p The FM "4" (AM "2") setting allows recep-
tion of only the strongest stations, while
lower settings let you receive weaker sta-
tions.
Switching the reception mode
If a digital broadcast reception condition gets
poor, the tuner automatically switches to the
analog broadcast of the same frequency level
in default. If you want to prevent a frequent
automatic switching, switch this setting to
[Analog].
% Touch [Blending] to switch the recep-
tion mode.
! [Analog]:
Receives analog broadcasting only.
! [D/A Auto]:
Automatically switches to the analog broad-
cast of the same frequency level as the digi-
tal broadcast.
p If you select "Analog" on this setting while
[Seek] is set to "HD", the setting on [Seek]
turns to "All" automatically.