Table of Contents
Advertisement
2.15 – Installing the Processor(s) and Heatsinks
Your brand new Tiger MPX supports the latest processor technologies from AMD. All the latest
Athlon MP and Athlon XP (Athlon XP in single mode only) processors can be used on this board.
However, only the following processors are certified and supported in dual processor
configuration:
Athlon MP processors up to Athlon MP 1900+ (check www.tyan.com for updates)
NOTE
If using a single processor, we recommend it be installed in socket CPU2
Duron processors, Athlon C (Thunderbird), processors are not certified or supported in single
or dual mode. Also, mixing different types of processors together is not supported as damage to
your processors, motherboard or both may occur. TYAN is not liable for damage as a result of
operating an unsupported configuration.
The following diagrams will detail how to install your processor(s):
The processors you choose to use may not look exactly like the one pictured above, nor will the
socket look exactly the same. For example, your processor may appear to be in a different color
and have different markings on it. The diagram is provided as a visual guide to help you install
socket processors.
1.
Lift the lever on the socket until it is perpendicular to the socket.
2.
Align the processor with the socket. There are keys underneath the processor just like
on memory modules to ensure that they insert the correct way.
3.
Seat the processor firmly into the socket by gently pressing down until the processor
sits flush with the socket.
4.
Place the socket lever back down until it snaps into place.
5.
Your processor is installed.
6.
Repeat these steps for the second processor if you are using two processors.
Heatsink Installation
After you are done installing the processor(s), you should proceed to installing their heatsinks.
Heatsinks will ensure that the processors do not overheat and continue to operate at maximum
performance for as long as you own them. Overheated processors are also dangerous to the
health of the motherboard.
Because there are many different types of heatsinks available from many different manufacturers,
a lot of them have their own method of installation. For the safest method of installation and
information on choosing the appropriate heatsink, please refer to AMD's certified heatsinks
webpage at the following Internet address:
The above page lists all of the recommended heatsink solutions for Athlon processors. These
heatsinks are also fully compatible and tested with the Athlon MP and Athlon XP processors.
www1.amd.com/products/athlon/thermals/
http://www.tyan.com
14
Advertisement
Table of Contents
