TYAN TIGER I7501S Manual page 33

3.6 – Super IO Configuration
Options related to the IO interface can be altered through the following.
Serial Port 1, 2
Address
Parallel Port Address
Parallel Port Mode
Parallel Port
3.7 – Onboard Device Configuration
Options related to onboard devices can be altered through the following.
Onboard ATI RageXL
Video
Onboard 10/100 LAN
Onboard Gigabit LAN #1
Onboard Gigabit LAN #2
3.8 – USB Configuration
Options related to USB can be altered through the following.
USB Function
USB 2.0 Controller
Legacy USB Support
USB Zip Emulation Type
USB Beep Message
COM1
Enabled
Disabled
Toggles use of serial ports 1 and or 2 (com1 & 2).
Auto
Enabling ports also requires you to enter the I/O
COM2
address for that port unless you select Auto.
Enabled
Disabled
Auto
Disabled These options are dependent on the IRQ and vice
3F8, 2F8 versa.
3E8, 2E8
Output Only Standard one-way protocol for parallel devices.
Bi-directional Two-way protocol
Enhanced Parallel Port may provide higher
EPP
bandwidth if an EPP compliant device is
Enhanced Compatibility Port may provide higher
ECP
bandwidth if an ECP compliant device is
IRQ
Sets the interrupt request for the parallel port.
IRQ 7
(IRQ 7 and IRQ 5 both can be defaults.)
IRQ 5
Enabled
Toggles the onboard ATI video graphics.
Disabled
Enabled
Toggles 10/100Mbit LAN port.
Disabled
Enabled
Toggles the 1Gbit LAN port.
Disabled
Enabled
Toggles the 1Gbit LAN port.
Disabled
2 USB ports, 4 USB
ports, 6 USB ports, 8
USB Ports
Enabled
Disabled
Enabled
Disabled
Auto
Enabled
Disabled
Auto
Enabled
Disabled
http://www.TYAN.com
Toggles the onboard USB ports.
Toggles the use of onboard USB ports
in DOS.
Toggles Zip drive emulation on USB
ports when in use.
Toggles USB beep error messaging.
33