Table of Contents
Advertisement
3.4 – Floppy Configuration
Options related to floppy drives can be altered through the following.
Floppy A
Floppy B
3.5 – Boot Settings Configuration
Options related to startup settings can be altered through the following.
Quick Boot
Quiet Boot
Add-On Rom
Display Mode
Boot up Num-Lock
PS/2 Mouse
Support
Typematic Rate
System Keyboard
Parity Check
Wait for F1 if "error"
Hit "Del" Message
Interrupt 19 capture
Primary Display
Device
360KB, 5 ¼"
1.2MB, 5 ¼"
720KB, 3 ½"
Defines the floppy drive type.
1.44MB, 3 ½"
2.88MB, 3 ½"
Disabled
Enabled
When set to Enabled, some self-tests will be skipped
Disabled
during POST.
Enabled
If set to Enabled, OEM logo will be displayed instead
Disabled
of POST messages.
Force BIOS
Leave as Default. This setting toggles the Add-On
Keep Current
ROM video display mode.
On
Specifies whether Num-Lock will be on or off during
Off
bootup.
Enabled
Toggles the use of the PS/2 mouse port.
Disabled
Fast
Changes speed of key repeat rate.
Slow
Present
Will allow continual boot even if the keyboard is not
Unavailable
attached.
Enabled
Toggles checking of system memory for corruption.
Disabled
Enabled
If Enabled, you will have to press F1 for the system
Disabled
to continue booting if an error is detected during
POST.
Enabled
Toggles display of pressing DEL key to enter BIOS.
Disabled
Enabled
This option allows removable devices to act as non-
Disabled
removable devices. Some SCSI RAID cards will
need this one enabled. Please refer to your SCSI
card's manual.
Auto
Change settings to alow dual monitor support
Onboard VGA
http://www.TYAN.com
32
Advertisement
Table of Contents
