Advertisement
Chapter 4: Diagnostics
Note: if you experience problems with setting up your system, always check the following things in
the following order:
By checking these items, you will most likely find out what the problem might have been when
setting up your system. For more information on troubleshooting, check the Tyan website at:
http://www.tyan.com
.
4.1 Beep Codes
Fatal errors, which halt the boot process, are communicated through a series of audible beeps.
For example, if the BIOS POST can initialize the video but an error occurs, an error message will
be displayed. If it cannot display the message, it will report the error as a series of beeps.
If you hear any beeps,
modules. Please check our website for memory compatibility.
For S2727, we implement the following beep codes for memory diagnostics:
6 Short beeps = No memory inserted.
7 Short beeps = Non-Registered or non-ECC DIMMs inserted.
Before contacting your vendor or Tyan Technical Support, be sure that you note as much as you
can about the beep code length and order that you experience. Also, be ready with information
regarding add-in cards, drives and O/S to speed the support process and come to a quicker
solution.
CPU, Memory, Video
please check your memory configuration, order, type, and check for faulty
http://www.tyan.com
43
Advertisement
