Installing Add-In Cards - TYAN TEMPEST I5000XT Manual

2.8 - Installing Add-In Cards

Before installing add-in cards, it's helpful to know if they are fully compatible
with your motherboard. For this reason, we've provided the diagrams below,
showing the slots that appear on your motherboard.
PCI-E X 16 S lot
PCI-E x16 slot
PCI-E x8 slot
PCI-E X 8 S lo t
PCI-X 64bit 133/100/66MHz slot
PCI-X 133 S lot
PCI 32-bit 33MHz slot
P CI-X Slot
Simply find the appropriate slot for your add-in card and insert the card
firmly. Do not force any add-in cards into any slots if they do not seat in
place. It is better to try another slot or return the faulty card rather than
damaging both the motherboard and the add-in card.
PCI IDESELs and IRQ Assignments
Slot IDSEL#
or Device
PCIX1 ESB2
(J25) PCIX_AD25
PCIX2 ESB2
(J28) PCIX_AD26
PCI (J20) ESB2
P_AD20
Onboard ESB2
1394(U) P_AD21
YOU MUST ALWAYS unplug the power connector from the
motherboard before performing system hardware changes.
NOTE
Otherwise you may damage the board and/or expansion
device.
PIRQ 0 PIRO 1
(INT A) (INT B)
ESB2 ESB2
PCIX_IRQ PCIX_IRQ
_N4 _N5
ESB2 ESB2
PCIX_IRQ PCIX_IRQ
_N8 _N9
ESB2 ESB2
PCI_IRQ_ PCI_IRQ_
N_E N_F
ESB2
PCI_IRQ_
N_A
27
PIRO 2 IRQ 3
(INT C) (INT D)
ESB2 ESB2
PCIX_IRQ PCIX_IRQ
_N6 _N7
ESB2 ESB2
PCIX_IRQ PCIX_IRQ
_N10 _N11
ESB2 ESB2
PCI_IRQ_ PCI_IRQ_
N_G N_H