Advanced Menu - TYAN TEMPEST I5000XT Manual

3.3 Advanced Menu

This section facilitates configuring advanced BIOS options for your system.
Main Advanced
Hardware Monitoring
BIOS Event Logging
Advanced Chipset Control
Advanced Processor Options
Diskette Controller
ATA Controller
LSI SAS Interface
Integrated Network Interface
Integrated Audio
Integrated 1394:
Integrated USB
I/O Device Configuration
PCI Configuration
Reset Configuration Data
↑↓
F1 Help Select Item
← →
Esc Exit Select Menu
Integrated Audio
This feature is used to configure the audio controller.
Disabled / Auto
Integrated 1394
This feature is used to enable the integrated 1394 controller.
Enabled / Disabled
Reset Configuration Data
If you install a new piece of hardware or modify your computer's hardware
configuration, the BIOS will automatically detect the changes and reconfigure
the ESCD (Extended System Configuration Data). Therefore, there is usually no
need to manually force the BIOS to reconfigure the ESCD.
However, sometimes, the BIOS may not be able to detect the hardware
changes. A serious resource conflict may occur and the operating system may
not even boot as a result. This is where the Reset Configuration Data BIOS
feature comes in.
This BIOS feature allows you to manually force the BIOS to clear the previously
saved ESCD data and reconfigure the settings. All you need to do is enable this
PhoenixBIOS Setup Utility
Security Power
[Auto]
[Enable]
[No]
-/+ Change Values
Enter Select
Sub-Menu
38
Boot Exit
Item Specific Help
Hardware monitoring
configuration
F9 Setup Defaults
F10 Save and Exit