Table of Contents
Advertisement
SDK Programmer's Guide
3. In the list of modules, check the Extend Script module.
4. Click OK to confirm your changes and dismiss the Preferences panel.
5. Quit GoLive and restart it.
Enabling and disabling modules
GoLive packages much of its functionality in units known as modules. An extension that you develop
using the SDK is simply another kind of module that GoLive can use. To add some particular new
functionality to GoLive, you can install and enable the module that provides it. You can also disable or
remove a module to remove its associated features and behaviors.
To turn off an extension but leave the extension in the Extend Scripts folder, use the Edit >
Preferences dialog to display Modules, as shown in the figure above. In the list of modules, uncheck the
modules any extensions you want to turn off. The change takes effect when you restart GoLive.
The precise set of modules you can disable successfully depends on the features your extension or site
uses—you cannot disable a module your site or your extension requires for its functionality.
Note:
Do not disable the Extend Script module. If this module is not enabled, GoLive cannot load or run
any extensions.
If you are not sure whether you need to enable a particular module, you can get a description of it in the
Preferences dialog
➤
Getting descriptions of modules
1. Select
2. In the right pane, click to select the module to be described.
3. If Show Item Information appears at the bottom of the modules list, as shown in the figure above, click it
to reveal the item information pane.
, and in the left panel of the Preferences dialog, select Modules .
Edit > Preferences
Adobe GoLive CS2 SDK
Installing and Configuring the GoLive SDK
ExtendScript module checked
Show description of selected module
16
Advertisement
Table of Contents
