Previewing And Exporting Surround Mixes - Adobe AUDITION 3 User Manual

• To edit a control point, drag it. The pan point moves in tandem to show you the relative position in the surround
field.
• To delete an individual control point, drag it up or down beyond the waveform display.
• To delete all control points, click Clear All.
• To create smoother transitions between control points, select Splines.
Click Play Track or Play All to hear the dynamically panned track.
5
Adjust volume levels for surround mixes
❖
In the Surround Encoder dialog box, select a track, and then set any of the following options:
Controls the amplitude level sent to the LFE channel.
Sub Channel Level
Use a bass management circuit in your monitoring setup to ensure that you hear the same bass levels as your
audience.
For tracks assigned to the Surround Panner, determines the Center channel level relative to
Center Channel Level
the Front Left and Front Right level. At 100, the Center channel receives an equal percentage of signal.
Controls the amplitude level of the selected track.
Track Level
Zoom waveforms in the Surround Encoder
❖
In the Surround Encoder dialog box, do any of the following:
• Place the mouse cursor over the time ruler that runs across the bottom of the waveform display, right-click, and
select a zoom option from the context menu.
• Right-click and drag the desired zoom area on the time ruler. (To zoom back out, right-click and choose Zoom
Out or Zoom Full from the context menu.)
• Position the mouse pointer in the waveform display, and spin the mouse wheel. This zooms into the time area
directly beneath the mouse pointer.

Previewing and exporting surround mixes

Preview controls for surround mixes
The preview controls in the Surround Encoder let you fine-tune a surround mix before exporting it.
ADOBE AUDITION 3.0 236
User Guide