Adobe AUDITION 3 User Manual page 240

A B C D
F G
Surround Panner options
A. Left Surround B. Front Left C. Center D. Front Right E. Right Surround F. Low Frequency Effects (Subwoofer) G. Pan point
Statically pan tracks in a surround mix
In the Surround Encoder dialog box, select a track, and deselect Pan Envelopes.
1
2 In the Surround Panner, set the pan point to any static position.
If you toggle a track's Pan Envelopes option on and off, any envelope points you have created are retained.
Dynamically pan tracks in a surround mix
When you select Pan Envelopes in the Surround Encoder, two envelope lines appear in the waveform display.
The yellow envelope line controls the Left/Right balance and the green line controls the Front/Surround balance.
These envelopes interact with the pan point in the Surround Panner and let you dynamically pan tracks over time.
Pan envelopes in the Surround Encoder
1 In the Surround Encoder dialog box, select a track in the Track List.
From the Panning Assignment menu, choose either Surround Panner, Stereo Source or Surround Panner,
2
Summed To Mono.
Above the right side of the waveform display, select Pan Envelopes.
3
Two envelope lines appear in the waveform display. (Because the yellow line starts on top, you won't see the second,
green line until you change the pan position.)
Do any of the following:
4
• To add a control point in the waveform display, click an envelope line. Alternatively, click where you want to set a
control point, without clicking an envelope, and then drag the pan point in the Surround Panner.
E
ADOBE AUDITION 3.0 235
User Guide