CLEANING AND
MAINTENANCE
Continued
CABINET
Air Passageways
• Use a vacuum cleaner or pressurized air to
clean.
Exterior
• Use a soft cloth dampened with a mild soap
and water mixture. Wipe the cabinet to remove
dust.
LOGS
• If you remove logs for cleaning, refer to In-
stalling Logs, pages 11 and 12, to properly re-
place logs.
• Replace log(s) if broken or chipped (dime-sized
or larger).
MAIN BURNER
Periodically inspect all burner flame holes with
the heater running. All slotted burner flame holes
should be open with yellow flame present. All
round burner flame holes should be open with a
small blue flame present. Some burner flame holes
may become blocked by debris or rust, with no
flame present. If so, turn off heater and let cool.
Remove blockage. Blocked burner flame holes
will create soot.
Btu (Variable)
Type Gas
Ignition
Manifold Pressure
Inlet Gas Pressure (in. of water) *
Dimensions, Inches (H x W x D)
Weight, pounds
* For purposes of input adjustment
110361-01E
SPECIFICATIONS
S26PTA
20,000/26,000
Propane/LP Only
Piezo
8" W.C.
Maximum
14"
Minimum
11"
Stove
24 x 27
Carton
22 x 31 x 31
Stove
66 lbs.
Shipping
80 lbs.
www.desatech.com
SERVICE HINTS
When Gas Pressure Is Too Low
• pilot will not stay lit
• burners will have delayed ignition
• heater will not produce specified heat
• propane/LP gas supply may be low
You may feel your gas pressure is too low. If so,
contact your local gas supplier.
TECHNICAL SERVICE
You may have further questions about installation,
operation, or troubleshooting. If so, contact DESA
Heating Products' Technical Service Department
at 1-866-672-6040. When calling, please have your
model and serial numbers of your heater ready.
You can also visit DESA Heating Products' tech-
nical services web site at www.desatech.com.
S26NTA
20,000/26,000
Natural Only
Piezo
3.0" W.C.
10.5"
5"
1
1
/
x 17
/
24 x 27
4
4
1
/
22 x 31 x 31
2
66 lbs.
80 lbs.
1
1
/
x 17
/
4
4
1
/
2
17