Tuning In Radio Stations - Marantz NR1402 Owner's Manual

Tuning in radio stations

Listening to FM/AM broadcasts
1
TUNER
Press twice to switch the
input source to "TUNER".
2
BAND
Press to select "FM" or
"AM".
FM When listening to an FM broadcast.
AM
When listening to an AM broadcast.
TUNER
AUTO
Now Playing
FM 87.50MHz
A1
[TUNING+/-] Tuning [BAND] Band [T.MODE] Mode
[PRESET+/-] Preset [MEMORY] Memory [SEARCH] Search
3
Tune in the desired broadcast
station.
q To tune in automatically (Auto tuning)
T.MODE
Press to light the "AUTO" indicator on the display, then
TUNING TUNING
use + or – to select the station you want to
hear.
w To tune in manually (Manual tuning)
T.MODE
Press to turn off the display's "AUTO" indicator, then
TUNING TUNING
use + or – to select the station you want to
hear.
• You can also operate via the main unit.
In this case, perform the following operations.
BAND
Press to select "FM" or "AM".
ui
Press to select the station you want to hear.
• If the desired station cannot be tuned in with auto tuning, tune it in
manually.
• When tuning in stations manually, press and hold
TUNING
– to change frequencies continuously.
• The time (default : 30 sec) for which the menu are displayed can be
set at menu "Tuner" (vpage 60). Press
the original screen.
BD
n Presetting radio stations (Manual preset)
Your favorite broadcast stations can be preset so that you can tune
them in easily. Up to 56 stations can be preset.
• Stations can be preset automatically at "Auto Preset"
(vpage 63). If "Auto Preset" is performed after performing
"Manual preset", the "Manual preset" settings will be overwritten.
1
Tune in the broadcast station you want to preset.
TUNER
FM 87.50MHz
[TUNING+/-] Tuning [BAND]
[PRESET+/-] Preset [MEMORY]
2
Press MEMORY
TUNER
To store preset:
Select A1-G8
[SHIFT] [1-8]
[TUNING+/-] Tuning [BAND]
[PRESET+/-] Preset [MEMORY]
3
SHIFT/TOP MENU
Press
which the channel (1 to 8 per a block) is to be preset,
PRESET +
then press
preset number.
4
Press MEMORY
TUNING
+ or
• To preset other stations, repeat steps 1 to 4.
uio p
to return to
AUTO
Now Playing
A1
Band [T.MODE] Mode
Memory [SEARCH] Search
.
[MEMORY]
A1
Band [T.MODE] Mode
[SEARCH] Search
Memory
to select the block (A to G) in
PRESET – 1 – 8
, or to select the
again to complete the setting.
20
Default settings
Block (A – G)
and Default Settings
Channel (1 – 8)
87.50 / 89.10 / 98.10 / 108.00 / 90.10 / 90.10 /
A1 – A8
90.10 / 90.10 MHz
522 / 603 / 999 / 1404 / 1611 kHz,
B1 – B8
90.10 / 90.10 / 90.10 MHz
C1 – C8 90.10 MHz
D1 – D8 90.10 MHz
E1 – E8 90.10 MHz
F1 – F8 90.10 MHz
G1 – G8 90.10 MHz
Specify a name for the preset broadcast station
(Preset Name) (vpage 63)
vSee overleaf