Table of Contents
Advertisement
5 − Reference and specifications
IMPORTANT SAFETY INSTRUCTIONS
5 − Reference and specifications
Troubleshooting
If you think that there is something wrong with this
cassette deck, make the checks listed below before
contacting a repair service. In some cases the problem
may lie with another component. Check all compo-
nents.
If the problem cannot be solved with any of the fol-
lowing checks, contact your nearest TEAC authorized
service center or your dealer for help.
Cannot switch on the power
Check the connection to the AC power sup-
®
ply. Check and make sure the AC source is not a
switched outlet and that, if it is, the switch is turned
on. Make sure there is power to the AC outlet by
plugging another item such as a lamp or fan into the
outlet.
No sound
Check the connection to the amplifier.
®
Check the amplifier settings.
®
Noisy playback
Keep away from equipment that generates a mag-
®
netic field, such as a TV or microwave oven.
Transport control keys do not work.
Load a cassette tape if not loaded.
®
If a cassette tape is loaded, reinsert it.
®
The cassette compartment does not close.
The cassette is not properly loaded. Reinsert it.
®
Poor sound quality
Clean the heads.
®
Check that the
Dolby NR
®
position as when recording was made.
Cannot record
If the erasure prevention tabs on top of the cassette
®
are broken off, cover the holes using pieces of adhe-
sive tape.
Check the connection to the amplifier and to the
®
source equipment.
Set the amplifier input/output selectors correctly.
®
Check the recording level setting.
®
Playback speed seems somewhat fast or slow
Check the pitch control setting.
®
switch is set to the same
Auto reverse does not occur
Set the
switch to
REV MODE
®
If the
switch is set to
REV MODE
®
back from the tape side facing you (side "A").
Synchro reverse dubbing is not possible.
Set the
switch to the
REV MODE
®
Load cassettes into both decks.
®
Set the tape transport direction to
®
Continuous play/record is not possible
Set the
switch to the
REV MODE
®
Load cassettes into both decks.
®
To make a continuous recording, start with TAPE 1.
®
NOTE
This cassette deck operates on a delicate micro-
computer and there may be occasions when the
deck does not function as expected because of
external noise or interference. Problems you
encounter on such occasions may be cured by
turning off the power, waiting for 1 minute or
more, then turning the power back on.
or
.
Ë
ä
, start play-
Ë
position.
Ë
on both decks.
¥
position.
ä
25
TASCAM 202
V
MK
Advertisement
Table of Contents
