Table of Contents
Advertisement
4 − Recording
IMPORTANT SAFETY PRECAUTIONS
4.
Check the recording direction.
If an indicator is lit which points in the direction
opposite to the one desired, change the direction
by pressing the opposite direction
key.
NOTE
Be careful not to press the PLAY (˙ or ¥) key
whose arrow points in the same direction as the
indicator. Doing so will start recording.
Recording is done in this order:
TAPE 1
Side "A"
≈
Side "B"
≈
TAPE 2
Side "A"
≈
Side "B"
You can start recording from side "B" of TAPE
1. But if you do so, side "A" of this tape is not
recorded: when recording reaches the end of side
"B", the TAPE 2 deck starts recording.
Parallel recording
This function allows you to record the same material
simultaneously on both TAPE 1 and TAPE 2.
Load tapes into both decks and press the
key to start recording.
PARALLEL REC
Before starting recording, check and correct the fol-
lowing by performing steps 1 – 7 on page 16 such as
Record direction, Reverse mode setting, Dolby NR
setting, Recording level, etc.
20
TASCAM 202
V
MK
NOTE
The TAPE 2 deck always starts recording from
side "A".
Start recording.
5
(
or
)
PLAY
˙
¥
Recording starts when you press the
key or the
points in the same direction as the indicator on
the TAPE 1 deck.
When recording is finished on the TAPE 1 deck,
the TAPE 2 deck automatically starts recording.
NOTE
The transition from TAPE 1 to TAPE 2 takes sev-
eral seconds.
A. To stop recording
Press the
currently recording.
When everything is ready, get back into stop mode if
the deck is in another mode.
During parallel recording, the
on the display.
During parallel recording, only the following keys
work:
TAEP 1 deck:
TAPE 2 deck:
Pressing the
tapes at once.
(
or
) key whose arrow
PLAY
˙
¥
STOP
(
) key of the deck which is
ª
PARALLEL
indicator is lit
STOP
(
)
ª
,
PAUSE
REC MUTE
STOP
(
) key on either deck stops both
ª
PAUSE
,
(
)
STOP
ª
Advertisement
Table of Contents
