Audio Input/Output Connections - Yamaha M7CL Owner's Manual

Connecting SB168-ES units to the M7CL-48ES using the STAGE BOX SETUP function • Audio input/output connections
After the steps above are completed, patches are assigned as follows:
SB168-ES
INPUT 1–16 jacks
ID #1 OUTPUT 1–6 jacks
OUTPUT 7/8 jacks
INPUT 1–16 jacks
ID #2 OUTPUT 1–6 jacks
OUTPUT 7/8 jacks
INPUT 1–16 jacks
ID #3 OUTPUT 1–6 jacks
OUTPUT 7/8 jacks
*1: Since the total number of input and output channels is limited to 64 in ring networks, an identical audio signal will be output to SB168-ES units ID#2
and ID#3.
NOTE
• If you select a ring connection, word clock master will be set to EtherSound (48kHz).
• To change the input or output channel patches on the M7CL-48ES, access the M7CL-48ES PATCH/NAME popup win-
dow.
• If you want to change the EtherSound patches from AVS-ESMonitor, refer to "Changing the EtherSound settings from
AVS-ESMonitor (M7CL-48ES)" ( → p. 243).
• The word clock setting cannot be changed if the AUTO CONFIGURE button is turned ON.
• For more information on the AUTO CONFIGURE button, please refer to "Connecting SB168-ES units to the M7CL-48ES
using the Stage Box Setup function" ( → p. 242).
■ Analog input connections
The INPUT and OMNI IN jacks are used mainly to connect microphones or monaural line-level devices. The ST IN jacks
are used mainly to connect microphones or stereo line-level devices.
NOTE
• In the default state, the ST IN or OMNI IN jacks are not patched. (Racks 5–8 are assigned to the ST IN
channels.) In order to use the signals connected here as inputs, you will need to make patch settings.
46
M7CL Owner's Manual
EtherSound patches set via
the Auto Configure
ES IN 1–16
ES OUT 1–6
ES OUT 7/8
ES IN 17–32
ES OUT 9–14
ES OUT 15/16
ES IN 33–48
*1
ES OUT 9–14
*1
ES OUT 15/16

Audio input/output connections

M7CL-48
M7CL-48ES patches set via
scene 000
CH 1–16
MIX 1–6
STEREO L/R
CH 17–32
MIX 7–12
STEREO L/R
CH 33–48
*1
MIX 7–12
*1
STEREO L/R
SB168-ES