Data Management - Pioneer SC-LX85 Operating Instructions Manual

12 The Advanced MCACC menu

Data Management

This system allows you to store up to six
MCACC presets, allowing you to calibrate your
system for different listening positions (or
frequency adjustments for the same listening
position). This is useful for alternate settings
to match the kind of source you're listening to
and where you're sitting (for example, watching
movies from a sofa, or playing a video game
close to the TV).
From this menu you can copy from one preset
to another, name presets for easier identifica-
tion and clear any ones you don't need.
! This can be done in Automatically conducting
optimum sound tuning (Full Auto MCACC) on
page 34 or Automatic MCACC (Expert) on page
80, either of which you should have already
completed.
1 Set the remote control to the receiver
operation mode, then press HOME MENU.
A Graphical User Interface (GUI) screen
appears on your TV. Use i/j/k/l and
ENTER to navigate through the screens and
select menu items. Press RETURN to exit the
current menu.
2 Select 'Data Management' from the
Home Menu.
3 Select the setting you want to adjust.
! Memory Rename – Name your MCACC
presets for easy identification (see Renaming
MCACC presets on page 86).
! MCACC Memory Copy – Copy settings from
one MCACC preset to another (see Copying
MCACC preset data on page 86).
! MCACC Memory Clear – Clear any MCACC
presets that you don't want (see Clearing
MCACC presets on page 86).
86
En
Renaming MCACC presets
If you have several different MCACC presets
that you're using, you may want to rename
them for easier identification.
1 Select 'Memory Rename' from the
Data Management setup menu.
2 Select the MCACC preset you want to
rename, then select an appropriate preset
name.
Use i/j to select the preset, then k/l to
select a preset name.
3 Repeat for as many MCACC presets
as necessary, then press RETURN when
you're finished.
You will return to the Data Management setup
menu.
Copying MCACC preset data
If you want to manually adjust the Acoustic
Calibration EQ (see Manual MCACC setup on
page 82), we recommend copying your current
settings to an unused MCACC preset. Instead
of just a flat EQ curve, this will give you a refer-
ence point from which to start.
! The settings made in Automatically conducting
optimum sound tuning (Full Auto MCACC) on
page 34 or Automatic MCACC (Expert) on page
80.
1 Select 'MCACC Memory Copy' from the
Data Management setup menu.
2 Select the setting you want to copy.
! All Data – Copies all the settings of the
selected MCACC preset memory.
! Level & Distance – Copies only the channel
level and speaker distance settings of the
selected MCACC preset memory.
3 Select the MCACC preset you'll be
copying the settings 'From', then specify
where you want to copy them ('To').
Make sure you don't overwrite an MCACC
preset you're currently using (this can't be
undone).
4 Select 'OK' to confirm and copy the
settings.
When MCACC Memory Copy? is displayed,
select YES. If NO is selected, the memory is not
copied.
Completed! shows in the GUI screen to
confirm the MCACC preset has been cop-
ied, then you automatically return to the
Data Management setup menu.
Clearing MCACC presets
If you are no longer using one of the MCACC
presets stored in memory, you can choose to
clear the calibration settings of that preset.
1 Select 'MCACC Memory Clear' from the
Data Management setup menu.
2 Select the MCACC preset you want to
clear.
Make sure you don't clear an MCACC preset
you're currently using (this can't be undone).
3 Select 'OK' to confirm and clear the
preset.
When MCACC Memory Clear? is displayed,
select YES. If NO is selected, the memory is not
cleared.
Completed! shows in the GUI screen
to confirm the MCACC preset has been
cleared, then you automatically return to the
Data Management setup menu.