Pioneer Elite SC-57 Operating Instructions Manual page 90

13 Additional information
Symptoms Causes
A USB memory device The USB memory device does
is not recognized. not support the mass storage
class specifications.
A USB hub is currently being
used.
This receiver recognizes the
USB memory device as a fraud.
A USB memory device Some formats of USB memory
is connected and dis- devices, including FAT 12, NTFS,
played, but the audio and HFS, cannot be played back
files stored on the USB on this receiver.
memory device cannot
The file format cannot be prop-
be played back.
erly played back on this receiver.
Cannot detect USB The USB keyboard is routed
keyboard. through a USB hub.
A PS2 keyboard is routed
through a PS2/USB connector.
Keyboard is not a USB HID
Class device.
Cannot enter correct Keyboard is not US-international
text using the USB layout keyboard.
keyboard.
HOME MEDIA GALLERY
Symptoms Causes
Cannot access the The LAN cable is not firmly
network. connected.
The router is not switched on.
Internet security software is cur-
rently installed in the connected
component.
The audio component on
the network which has been
switched off is switched on.
90
En
Remedies
Try using a USB memory device compatible with
the mass storage class specifications. Note that
there are cases where even the audio files stored
on a USB memory device compatible with the mass
storage class specifications are not played back on
this receiver (page 37).
Connect the USB memory device and switch on this
receiver (page 29).
This receiver does not support USB hubs (page 37).
Switch off and on again this receiver.
Check whether the format of your USB memory
device is either FAT 16 or FAT 32. Note that the FAT
12, NTFS, and HFS formats cannot be played back
on this receiver (page 37).
See the list of file formats that can be played back
on this receiver (page 38).
This receiver is not compatible with USB hubs. Plug
the keyboard directly into the receiver.
PS2 keyboards cannot be used with this receiver,
even if routed through a PS2/USB connector. Use a
USB keyboard.
Some devices will not be detected. Use a USB HID
Class keyboard.
Use a US-international layout keyboard. NB: Some
characters cannot be entered.
Remedies
Firmly connect the LAN cable (page 28).
Switch on the router.
There are cases where a component with Internet
security software installed cannot be accessed.
Switch on the audio component on the network
before switching on this receiver.
Symptoms Causes
Playback does not start The component is currently
while "Connecting..." disconnected from this receiver
continues to be dis- or the power supply.
played.
The PC or Internet The corresponding IP address is
radio is not properly not properly set.
operated.
The IP address is being auto-
matically configured.
The audio files stored Windows Media Player 11 or
on components on the Windows Media Player 12 is not
network, such as a PC, currently installed on your PC.
cannot be played back.
Audio files were recorded in
formats other than MP3, WAV
(LPCM only), MPEG-4 AAC,
FLAC, and WMA.
Audio files recorded in MPEG-4
AAC or FLAC are being played
back on Windows Media Player
11 or Windows Media Player 12.
The component connected
to the network is not properly
operated.
The component connected to
the network does not permit file
sharing.
The folder stored on the compo-
nent connected to the network
has been deleted or damaged.
Network connections could be
restricted due to the computer's
network settings, security set-
tings, etc.
Cannot access the The component connected to
component connected the network is not properly set.
to the network.
There are no playable audio files
on the component connected to
the network.
Remedies
Check whether the component is properly con-
nected to this receiver or the power supply.
Switch on the built-in DHCP server function of your
router, or set up the network manually according to
your network environment (page 78).
The automatic configuration process takes time.
Please wait.
Install Windows Media Player 11 or Windows Media
Player 12 on your PC (page 47).
Play back audio files recorded in MP3, WAV (LPCM
only), MPEG-4 AAC, FLAC, or WMA. Note that some
audio files recorded in these formats may not be
played back on this receiver.
Audio files recorded in MPEG-4 AAC or FLAC can-
not be played back on Windows Media Player 11 or
Windows Media Player 12. Try using another server.
Refer to the operation manual supplied with your
server.
Check whether the component is affected by spe-
cial circumstances or is in the sleep mode.
Try rebooting the component if necessary.
Try changing the settings for the component con-
nected to the network.
Check the folder stored on the component con-
nected to the network.
Check the computer's network settings, security
settings, etc.
If the client is automatically authorized, you need to
enter the corresponding information again. Check
whether the connection status is set to "Do not
authorize".
Check the audio files stored on the component con-
nected to the network.