INSTALLATION
Continued
Amity™ and Townsend™ Models
8. Fasten each leg to stove with four (4)
M8 x 1.25 - 20mm bolts. Use a flat
washer and lock washer with each bolt.
Tighten bolts into threaded holes on
stove body (see Figures 8 and 9). Use
an adjustable wrench or a 12mm socket.
9. Fasten stove bottom to stove with four
(4) M6 x 1 - 25mm bolts. Use a flat
washer and lock washer with each bolt.
Tighten bolts into threaded holes on
stove body (see Figures 8 and 10). Use
an adjustable wrench or a 10mm socket.
Sheraton™ Models
8. Fasten each leg to stove with four (4)
bolts. Use a flat screw driver to tighten
bolt to leg. Insert bolt in threaded holes
on stove body (see Figures 8 and 11).
9. Fasten stove bottom to stove with four
(4) M6 x 1 - 25mm bolts. Use a flat
washer and lock washer with each bolt.
Tighten bolts into threaded holes on
stove body (see Figures 8 and 12). Use
an adjustable wrench or a 10mm socket.
104461
Door Hinge Step
Bolt Hole
Leg
Hole
Leg
Hole
Figure 8 - Locating Threaded Holes for Stove Bottom, Legs, and Door Attachment
(Appearance May Vary Depending on Model)
Washers
Bolt
Leg
Figure 9 - Attaching Stove Legs (Amity™
Model Shown)
Washers
Bolt
Stove
Bottom
Figure 10 - Attaching Stove Bottom
(Amity™ Model Shown)
9
OWNER'S MANUAL
Front
Stove
Bottom
Hole
Bolt
Bottom Of
Stove Unit
Figure 11 - Attaching Stove Legs
(Sheraton™ Model)
Washers
Bolt
Bottom Of
Stove Unit
Figure 12 - Attaching Stove Bottom
(Sheraton™ Model)
Door Catch Bolt
With Adjustable
Hex Nuts Hole
Leg
Hole
Bottom Of
Stove Unit
Leg
Hole
Bottom Of
Stove Unit
Leg
Bottom Of
Stove Unit
Stove
Bottom
Continued