Desa VSGF33NRC Owner's Operation And Installation Manual page 19

OPERATING FIREPLACE
Continued
Flame Adjustment Knob
ON
OFF
REMOTE
Selector Switch in Remote
Position (Optional Hand-
Held Remote Control)
Figure 30 - Setting the Selector Switch,
Control Knob, and Flame Adjustment
Knob for Hand-Held Remote Operation
ON/OFF MODEL HRC100
Hold the control button on the hand-held remote
until burner turns on. Hold the control button
again until burner turns off (see Figure 31).
TO LOCK press both buttons on hand-held
remote control until light stops flashing. Hand-
held remote control is now locked. If the fire is
on it will be turned off automatically. In the
locked state, the light will not light up when
any button is pressed.
TO UNLOCK press both buttons together
on hand-held remote control until the light
stops flashing. The hand-held remote is now
unlocked.
Figure 31 - On/Off Hand-Held Remote
Control Unit
THERMOSTAT MODEL HRC200
The hand-held remote can be operated using
either the manual mode (MANU) or thermo-
static mode (AUTO) (see Figure 32). To select
Fahrenheit/Centigrade mode display, carefully
press the ˚C/˚F mode button with the end of a
paper clip or similar blunt object.
Manual Mode
1. Press the POWER and LOCK buttons
together to turn on the hand-held remote
control.
2. Press the MANU button to turn on the
fireplace.
119304-01A
Control Knob
in On Position
Control Button
Turns Burners
On and Off
www.desatech.com
3. Press the POWER and LOCK buttons
together to turn off the fireplace.
Auto (Thermostatic) Mode
1. Press the POWER and LOCK buttons
together to turn on the hand-held remote
control.
2. Press AUTO button to select this mode.
3. Set the desired room temperature by press-
ing the TEMP + or - buttons.
4. Press the POWER and LOCK buttons
together to turn off the fireplace
Note: Do not leave the hand-held remote in
the AUTO mode close to the fireplace. The
radiant heat from the fireplace will turn off the
fireplace. Ideally, place the hand-held remote
in the center of the room facing towards the
fireplace.
Note: Do not hold the hand-held remote for
a long time. Body temperature will affect its
operation in the AUTO mode.
Digital
Display
Shows
Temperature
ROOM
and Settings
TEMP
LOCK
Turns
Burners On
MANU
or Off
Decreases
Room
Temperature
in AUTO
Mode
Locks System
to Prevent
Accidental Ignition
Figure 32 - Thermostat Hand-Held
Remote Control Unit Selections HRC200
Safety Features
When away from home for an extended period
of time or as a child safety feature to prevent
accidental ignition of the fireplace, the receiver
ON/OFF/REMOTE switch should be in the
OFF position.
Auto Shutoff Feature
1. If the average room temperature exceeds
82 degrees Fahrenheit (28 degrees Centi-
grade), the hand-held remote control will
perform a safety override and shut the
fireplace off. This feature is not available
in the MANU mode.
Turns Hand-
Held Remote
On or Off and
Allows You
AUTO
SET
TEMP
to Choose
the Manual
TEMP
POWER
Setting
AUTO
Selects Auto
ºC/ºF
Setting
Increases
Room
Temperature
in AUTO
Mode
19