Set Lock Code - JVC AV-27F703 - 27" Real Flat TV User Manual

V-Chip

Set Lock Code

Channel Guard and V-Chip settings are protected by a four-digit Lock Code. Your TV comes
pre-set with a Lock Code of "0000". You may change the code to any four-digit number you
wish. To change the Lock Code, follow the steps below.
Press the M
To SET LOCK CODE
To operate (Lock icon
Press Z
ERO
The first digit will be highlighted
To select the number
To move to the next digit
Continue to follow these directions for all four numbers
To FINISH
To save settings and exit
Your Lock Code is now set.
NOTES:
• After a power interruption you must reset the Lock Code.
• Write your Lock Code number down and keep it hidden from potential viewers.
• If you forget the Lock Code, a new code may be set using the steps listed above.
36
button
ENU
appears)
to access the Lock Code