Table of Contents
Advertisement
V-Chip
Set Lock Code
Channel Guard and V-Chip settings are protected by a four-digit Lock Code. Your TV comes
pre-set with a Lock Code of "0000". You may change the code to any four-digit number you
wish. To change the Lock Code, follow the steps below.
Press the MENU button
,&V
To SET LOCK CODE
• I_
To operate (The Lock icon I_1 appears)
Press ZERO to access the Lock Code
INITIAL
SETUP_
SET
LOCK
CODE
LOCK
CODE
0000
FINISH
SELECT
BY[][]
OPERATE
BY[][]
EXIT
BY I_TI_I
The first digit will be highlighted
• I_
To select the number
AS'
To move to the next digit
Continue to follow these directions for all four numbers
,&V
TO FINISH
• I_
To save settings and exit
Your Lock Code is now set.
NOTES:
• After a power interruption you must reset the Lock Code.
• Write your Lock Code number down and keep it hidden from potential viewers.
• If you forget the Lock Code, a new code may be set using the steps listed above.
36
Advertisement
Table of Contents
