Table of Contents
Advertisement
Auto Exposure Bracketing
Auto Exposure Bracketing allows you to shoot in selected compensated
EV values (maximum of ±2 EV) shifting from the automatically set proper
exposure (or selected exposure in Manual exposure mode) for three shots
each time the shutter is released. For example, this is useful in selecting
one shot out of several shots with bracketed exposures after processing
the film, when the subject has pronounced contrast in shooting with
colour slide film and where the latitude of the proper exposure is minimal.
1
Rotate the Command Dial while pressing
the Auto Exposure Bracketing
to set desired bracketing value (within ±2
EV without combining exposure compen-
sation). The display changes as follows:
• When the bracketing value is set (and while the
exposure meter is on),
the LCD panel, and
exposure display blink in the viewfinder. Bracketing
value can be confirmed by pressing the
• Shutter speed and aperture in Auto-Multi Program,
aperture in Shutter-Priority Auto and shutter speed
in Aperture-Priority Auto and Manual exposure
mode are bracketed.
• In any of the exposure modes, Flash Exposure
Bracketing and Auto Exposure Bracketing are
simultaneously performed when a Speedlight is
used.
Compensated EV value and bracketing order
Electronic analog
Compensated EV value
exposure display
0.5
1.0
1.5
2.0
62
button
No display
(cancel)
(Multiple Exposure)
appears and
blinks in
and electronic analog
button.
Bracketing order
0, –0.5, +0.5
0, –1.0, +1.0
0, –1.5, +1.5
0, –2.0, +2.0
2
Compose picture, confirm focus
indicator
• Each time the shutter release button is depressed,
correct EV, under EV, and over EV exposure are
performed in that order while the blinking electronic
analog exposure display shows the correct, under,
then overexposure. Compensated shutter speed
Electronic analog
and aperture values are displayed during shooting.
exposure display
• If the Exposure Compensation function (page 61) is
First shot
also set, bracketing will be combined with the
(correct EV)
Exposure Compensation values. It is useful to
perform Bracketing with a compensated value of
over +2 EV or under –2 EV.
• If the end of the film roll is reached during
Second shot
bracketing, the remaining shots can be taken after
(under EV)
new film has been loaded. Also, if you turn the
power switch off during bracketing, the remaining
shots can be taken after the power is turned back
Third shot
on.
(over EV)
3
Auto Exposure Bracketing is completed
and automatically cancelled when the
third shot is taken.
•
and
electronic analog exposure display in the viewfinder
disappear when the bracketing is completed.
• To cancel the bracketing, rotate the Command Dial
while pressing the
disappears from the LCD panel. Bracketing is not
cancelled by turning the power switch off.
Check points
• Auto Exposure Bracketing cannot be performed in
Program.
• Auto Exposure Bracketing and Multiple Exposure (page 64) cannot be set
simultaneously.
• Auto Exposure Bracketing and Long Time exposure (page 60) cannot be set
simultaneously.
and shoot.
in the LCD panel and
and the
button so the display
(AUTO mode) and Vari-
63
Hide quick links:
Advertisement
Table of Contents
