Advanced Bios Features - eMachines EL1358 Service Manual

Advanced BIOS Features

Field
Quick Boot
Quiet Boot
1st/2nd/3rd/4th Boot
Device
Hard Disk Drive
Priority
Optical Disk Drive
Priority
Removable Device
Priority
Network Device
Priority
Bootup Num-Lock
Boot Sector Virus
Protection
USB Beep Message
12
Description
When enabled, the system starts up more quickly be elimination
some of the POST routines.
When enabled, BIOS will show a full screen logo when booting; if
disabled, BIOS will show the diagnostic POST screen when
booting.
Displays the device assigned to the specified boot sequence. The Setup Utility attempts to
boot the operating system in this order. By default, the computer searches for boot
devices in the following order:
• Hard disk
• Optical drive (CD/DVD)
• Removable device
• Network boot (LAN)
Press Enter to specify the boot device priority sequence for the installed hard drive(s).
Press Enter to specify the boot device priority sequence for the installed optical drive.
Press Enter to specify the boot device priority sequence for removable drives.
Press Enter to specify the boot device priority sequence foe available network drives.
If you set this item to On, the keyboard Num Lock key will be active
when the computer boots up.
If set to Disabled, when anything attempts to access the boot sector
or hard disk partition table, there will be no warning message.
Select whether to allow the BIOS to emit error beeps or display
error messages during USB device enumeration.
Value
Enabled
Disabled
Enabled
Disabled
On
Off
Enabled
Disabled
Enabled
Disabled
EL1358 Service Guide