Dell OptiPlex 330 User Manual page 81

Processor Info
Memory Info
PCI Info
Date/Time
Boot Sequence
Drives
Diskette Drive
• With diskette drive :
is default
Internal
• Without diskette drive :
is default.
USB
SATA 0 through
SATA n
Identifies the Processor Type, Processor Clock Speed,
Processor Bus Speed, Processor L2 Cache size, and
Processor ID. States whether the processor is
Hyperthreading and Multiple Core capable and
whether it supports 64-bit Technology. None of these
fields can be modified.
Lists the Installed Memory size, Memory Speed,
Memory Channel Mode (dual or single), Memory
Technology, and memory slot information of installed
memory. For each populated memory slot, System
Setup lists the DIMM Size, ECC support, Rank, Type,
and Organization. Empty memory slots are denoted as
"Empty." None of these fields can be modified.
Identifies any installed PCI or PCI Express cards and
their respective Slot ID. None of these fields can be
modified.
Displays current date and time settings.
The computer attempts to boot from the sequence of
devices specified in this list. This option allows you to
control/modify the boot sequence (see "Boot Sequence"
on page 88).
This option enables or disables the floppy drive. The
options are Off, Internal, USB, and Read Only.
NOTE:
If USB is selected, ensure that the USB Controller
setup option under Onboard Devices is set to On.
Identifies and enables and disables the drives attached
to the SATA connectors on the system board and lists
the capacities for the hard drives.
System Setup
81