NOTICE:
Bending the pins can permanently damage the processor.
1 Follow the procedures in "Before You Begin" on page 143.
2 Unpack the new processor, being careful not to bend any of the processor
pins.
3 If the release lever on the socket is not fully extended, move it to that
position.
NOTICE:
permanent damage to the processor and the computer when you turn on the
computer.
4 Orient the front and rear alignment-notches on the processor with the
front and rear alignment-notches on the socket.
5 Align the pin-1 corner of the processor and socket.
9
250
Desktop Computer Parts
Be careful not to bend any of the pins when you unpack the processor.
You must position the processor correctly in the socket to avoid
2
1
8
3
7
4
5
6