Dell Precision 400 User Manual page 119

Message
The loaded card is not
a category card. Press
OK to proceed.
No more DMA values can
be added.
No more interrupt
values can be added.
No more memory values
can be added.
No more I/O port
values can be added.
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary.
Table C-1. Configuration Utility Messages (continued)
Probable Cause
The category you have
chosen is not the correct cat-
egory under which to add
this card.
No more values are avail-
able for the resource you are
trying to add or modify.
Corrective Action
Select OK. The ICU automatically opens the cor-
rect category's dialog box. Continue the proce-
dure for adding the card as described in "Adding a
Listed Card" or "Adding an Unlisted Card" in
Chapter 4.
The maximum number of values for each
resource is as follows:
•
4 DMA channels
•
7 IRQ lines
•
9 memory address blocks
•
20 I/O ports
To free values for the resource you are trying to
add or modify, delete some of the values listed in
the resource box for the card. If your card requires
all of the values listed, contact your card manu-
facturer to resolve the issue.
ISA Configuration Utility Messages C-3