Clear Cmos Procedures - Biostar MCP6P M2 PLUS Setup Manual

Motherboard Manual
JSPDIF_OUT1: Digital Audio-out Connector
This connector allows user to connect the PCI bracket SPDIF output header.
JCMOS1: Clear CMOS Header
By placing the jumper on pin2-3, it allows user to restore the BIOS safe setting
and the CMOS data, please carefully follow the procedures to avoid damaging
the motherboard.

※ Clear CMOS Procedures:

1. Remove AC power line.
2. Set the jumper to "Pin 2-3 close".
3. Wait for five seconds.
4. Set the jumper to "Pin 1-2 close".
5. Power on the AC.
6. Reset your desired password or clear the CMOS data.
16
Pin
1
2
3
1 3
Pin 1-2 Close:
Normal Operation
(default).
1 3
Pin 2-3 Close:
Clear CMOS data.
Assignment
+5V
SPDIF_OUT
Ground
1 3
1 3