Biostar K8M800 MICRO AM2 User Manual page 67

K8M800 Micro AM2 BIOS Setup
APIC Mode
Selecting Enabled enables APIC mode reporting from the BIOS to the operating system.
The Choices: Enabled (default), Disabled
MPS Version Control For OS
The BIOS supports version 1.1 and 1.4 of the Intel multiprocessor specification.
Select version supported by the operation system running on this computer.
The Choices: 1.4 (default), 1.1.
OS Select For DRAM > 64MB
A choice other than Non-OS2 is only used for OS2 systems with memory exceeding
64MB.
The Choices: Non-OS2 (default), OS2.
Delay for HDD (Secs)
This item allows you to select the timing of Delay for HDD
The Choices: 0 (default).
Min= 0
Max= 15
Key in a DEC number.
Small LOGO (EPA) Show
This item allows you to select whether the "Small Logo" shows.
Enabled (default)
Disabled
Summary Screen Show
This item allows you to enable/disable the summary screen. Summary screen means
system configuration and PCI device listing.
The Choices: Disabled
"Small Logo" shows when system boots up.
No "Small Logo" shows when system boots
(default), Enabled.
15