Desa (V)T32EN-A Series, (V)T32EP-A Series Owner's Operation And Installation Manual page 21

FIREPLACE INSTALLATION
Continued
INSTALLING OPTIONAL BRICK LINER
MODEL BL32D
WARNING: If fireplace has been running, turn
off and unplug fireplace. Let cool before installing
brick liner.
This brick liner kit is optional. You may purchase brick liner from
your local retailer or see page 37.
CAUTION: Always handle brick panels with two
hands. Do not force brick panels into place. Exces-
sive force will break brick panels.
1. Remove top and bottom louvers to allow access to door latches.
2. Unlock door latches and open glass door. See steps 1 and 2 of
Removing/Replacing Glass Door, page 20.
3. If installing brick liner in new fireplace, go to step 4. If install-
ing brick liner in an existing fireplace, carefully remove logs,
lava rock and ember material.
4. Remove three screws from deflector shield on the inside top
of firebox. Set shield and screws aside.
5. Install rear brick panel first. Rest bottom edge of panel on back
edge of grate (see Figure 38).
6. Install left side brick panel by sliding it between the grate and
the side of the firebox (see Figure 39).
7. Install the right brick panel using the same method described
8. Replace deflector shield using screws removed in step 4.
9. Follow instructions beginning in column 2 to install logs, lava
rock and ember material.
Rear Brick
Panel
Figure 38 - Installing Rear Brick Panel
116647-01A
Installing Logs, Lava Rock and Glowing Embers
Left Side
Brick Panel
Figure 39 - Installing Side Brick Panels
www.desatech.com
FIREPLACE INSTALLATION
Installing Optional Brick Liner Model BL32D
21
21