ACRONIS TRUE IMAGE SERVER 8.0 User Manual page 63

Specifies the hard disks to include into the image file by numbers. The list of
available hard disks is provided by the /list command. An image may contain
data of more than one hard disk. In that case, separate disk numbers by commas,
e.g.:
/harddisk 1,3
/partition:[partition number]
Specifies the partitions to include into the image file by numbers. The list of
available partitions is provided by /list. Partition numbers are specified as <disk
number>-<partition number>, e.g.:
/partition: 1-1,1-2,3-1
/file_partition:[partition letter]
Specifies the partition where the image file will be stored (by letter or number). This
option is used with /filename:file_name. In that case the file name must be
specified without drive letter or root folder. For example:
/file_partition:D /filename:"\1.tib"
/raw
Use this option to create an image of a disk (partition) with unrecognized or
unsupported file system. This will copy all disk/partition contents sector-by-sector.
Without this option only the sectors containing useful system and user data are
imaged.
/compression:[0...9]
Specifies the image compression level. It ranges from 0 to 9 and is set to 3 by
default.
/incremental
Sets the image type to incremental. If there is no a basic image file to append an
incremental one, a complete image will be created.
/split:[size in MB]
Splits image file into parts of the specified size.
/reboot
Reboots the server after the operation is completed.
/log:[file name]
Creates a log file of the current operation with the specified file name.
2. deploy
Restores a disk or partition from an image.
Options
Copyright © Acronis, Inc., 2000-2005
Command-line mode and scripting
63