Command-line mode and scripting
Chapter 10. Command-line mode and
Acronis True Image Server 8.0 for Windows supports the command-line mode, as
well as the GUI mode, and can be used to execute XML scripts.
10.1
Working in the command-line mode
An administrator might need a console interface in some situations. Acronis True
Image Server 8.0 for Windows supports this mode with ti_cons.exe utility. The file
is located in a folder where Acronis True Image Server 8.0 for Windows has been
installed, by default it is C:\Program Files\Acronis\TrueImage.
10.1.1
Supported commands
ti_cons has the following format:
ti_cons /[command] /[option
The following commands are supported (each command may be accompanied by
additional options):
1. create
Creates an image file with the specified file name. A complete image is created by
default. Use the /incremental option to create an incremental image.
Options
/progress:[on | off]
Shows/hides the progress information (percent completed). It is shown by default.
/filename:[filename]
Sets the image file name.
/password:[password]
Protects an image with a password.
/net_user:[username]
Specifies a user name when creating an image on a network drive.
/net_password:[password]
Specifies a user password when creating an image on a network drive.
/harddisk:[disk number]
62
scripting
] [option
1
]...
2
Copyright © Acronis, Inc., 2000-2005