Network Settings - ACRONIS SNAP DEPLOY 2.0 User Manual

Then select the membership of target PCs:
Click Next to continue.
If you have selected the domain membership, later you will be asked for the
domain administrator's name and password.
6.8

Network settings

You can get Internet Protocol (IP) settings assigned automatically to target
computers if your network supports this capability and you have a DHCP
server connected. Otherwise, you will need to set IP properties manually.
In the Network Settings window, select:
Obtain an IP address automatically – IP addresses of target computers will
be dynamically obtained from a DHCP server.
Use the following IP addresses: – set IP addresses manually. Having
selected this setting, you will have to enter:
Copyright © Acronis, Inc., 2000-2007
start1 (2) – the first figure in a double-valued number (2...)
count1 (3) – increasing quantity of first figures (2..., 3..., 4...)
start2 (5)– the second figure in a double-valued number(...5)
count2 (4)– increasing quantity of second figures (...5, ...6, ...7, ...8)
Domain -- select this option and type the domain name, if the target
PCs are to join the domain membership. You must have administrator
rights to set the domain membership.
Workgroup -- select this option and type the workgroup's name if
target PCs are to join a workgroup.
Figure 37. Computer name
o Start IP address – first IP address in a range of target PCs
Deployment
49