Table of Contents
Advertisement
count1 (4)– increasing quantity of second figures (...5, ...6, ...7, ...8)Then
select the membership of target PCs:
Click Next to continue.
If you have selected the domain membership, in the window enter the
administrator's name and password.
5.1.6
Network settings
You can get Internet Protocol (IP) settings assigned automatically to target
computers if your network supports this capability. Otherwise, you need to set
IP properties manually.
In the Network Settings window, select:
Obtain an IP address automatically -- Specifies that this network
connection dynamically obtain IP addresses to target computers from a
DHCP server.
Use the following IP addresses: -- set IP addresses manually. Selecting
this setting, you need to enter:
Copyright © Acronis, Inc., 2000-2006
Domain -- select this option and type domain name, if target PCs are
to join domain membership. You must have administrator rights to set
the domain membership.
Workgroup -- select this option and type the workgroup's name if
target PCs are to join a workgroup.
Figure 29. Computer name
o Start IP address -- first IP address in a range of target PCs
o Last IP address -- last IP address in a range of target PCs
o Subnet Mask -- subnet mask address
Deployment
41
Advertisement
Table of Contents
