Components Modification - ACRONIS SNAP DEPLOY Manual

Installation and operation
You can run Acronis Snap Deploy Management Console by clicking Start →
All programs → Acronis → Snap Deploy → Acronis Snap Deploy
Management Console.

2.11 Components modification

You can modify features of the installed components.
To customize component features,
1. Run AcronisSnapDeploy.exe.
2. In the Install Menu, click on the component you are about to customize.
3. Click Modify in the Modify, Repair or Remove Installation window.
4. In the Custom Setup window, click on the feature:
14
Figure 2. Modify, repair or remove installation
Will be installed on a local hard drive -- selecting this option
installs the selected component feature on your computer's disk drive.
Entire feature will be installed on a local hard drive -- selecting
this option installs the selected component feature, as well as all
features and subfeatures in the product tree below the selection on
your computer's disk.
Entire feature will be unavailable -- selecting this option removes
the feature from your computer's disk drive.
Copyright © Acronis, Inc., 2000-2006