Task Statuses - ACRONIS Backup & Recovery 10 Advanced Server Virtual Edition User Manual

The user can stop a running task or a task that needs interaction. The task changes to the
Stopping state and then to the Idle state. A waiting task can also be stopped. In this case, since
the task is not running, "stop" means removing it from the queue .
Task state diagram

Task statuses

A task can have one of the following statuses: Error; Warning; OK.
A task status is derived from the result of the last run of the task.
Status
1 Error
2 Warning
3 OK
186
How it is determined
Last result is "Failed"
Last result is "Succeeded
with warning"
Last result is
"Succeeded", "-", or
"Stopped"
How to handle
Identify the failed task -> Check the task log to find out the
reason of the failure, then do one or more of the following:

Remove the reason of the failure -> [optionally] Start the
failed task manually

Edit the failed task to prevent its future failure

Edit the local plan to prevent its future failure in case a
local plan has failed

Edit the backup policy on the management server in case a
centralized plan has failed
View the log to read the warnings -> [optionally] Perform
actions to prevent the future warnings or failure.
No action is required.
The "-" state means that the task has never been started or has
been started, but has not finished yet and so its result is not
available.
Copyright © Acronis, Inc., 2000-2010