Post-Recovery Command; Recovery Priority - ACRONIS Backup & Recovery 10 Advanced Server Virtual Edition User Manual

4. Depending on the result you want to obtain, select the appropriate options as described in the
table below.
5. Click Test command to check if the command is correct.
Check box
Fail the task if the command
execution fails
Do not recover until the
command execution is
complete

Post-recovery command

To specify a command/executable file to be executed after the recovery is completed
1. In the Command field, type a command or browse to a batch file.
2. In the Working directory field, specify a path to a directory where the command/batch file will be
executed.
3. In the Arguments field, specify the command execution arguments, if required.
4. If successful execution of the command is critical for you, select the Fail the task if the command
execution fails check box. In case the command execution fails, the task run result will be set to
Failed.
When the check box is not selected, the command execution result does not affect the task
execution failure or success. You can track the command execution result by exploring the log or
the errors and warnings displayed on the Dashboard.
5. Click Test command to check if the command is correct.
A post-recovery command will not be executed if the recovery proceeds with reboot.
3.4.2.2

Recovery priority

This option is effective for both Windows and Linux operating systems.
This option is not available when operating under the bootable media.
The priority of a process running in a system determines the amount of CPU and system resources
allocated to that process. Decreasing the recovery priority will free more resources for other
applications. Increasing the recovery priority might speed up the recovery process by requesting the
operating system to allocate more resources to the application that will perform the recovery.
However, the resulting effect will depend on the overall CPU usage and other factors like disk I/O
speed or network traffic.
The preset is: Normal.
122
Selected
Selected
Result
Preset
Perform the recovery
only after the
command is
successfully executed.
Fail the task if the
command execution
failed.
Selection
Cleared Selected
Selected Cleared
N/A
Perform the
recovery after the
command is
executed despite
execution failure
or success.
Copyright © Acronis, Inc., 2000-2010
Cleared
Cleared
Perform the
recovery
concurrently with
the command
execution and
irrespective of the
command execution
result.