Support For Snmp - ACRONIS BACKUP AND RECOVERY 10 ADVANCED SERVER VIRTUAL EDITION - UPDATE 3 User Manual

You might experience short pauses that are required to rewind the tape. Low-quality or old tape, as
well as dirt on the magnetic head, might lead to pauses that can last up to several minutes.
Limitations
1. Multiple full backups within one archive are not supported.
2. Individual files cannot be recovered from a disk backup.
3. Backups cannot be deleted from a tape either manually or automatically during cleanup.
Retention rules and backup schemes that use automatic cleanup (GFS, Tower of Hanoi) are
disabled in the GUI when backing up to a locally attached tape.
4. Personal vaults cannot be created on tape devices.
5. Because the presence of an operating system cannot be detected in a backup located on a tape,
Acronis Universal Restore (p. 420) is proposed at every disk or volume recovery, even when
recovering a Linux or non-system Windows volume.
6. Acronis Active Restore (p. 408) is not available when recovering from a tape.
Recovery from a locally attached tape device
Before creating a recovery task, insert or mount the tape containing the backup you need to recover.
When creating a recovery task, select the tape device from the list of available locations and then
select the backup. After recovery is started, you will be prompted for other tapes if the tapes are
needed for recovery.

2.13 Support for SNMP

SNMP objects
Acronis Backup & Recovery 10 provides the following Simple Network Management Protocol (SNMP)
objects to SNMP management applications:

Type of event
Object identifier (OID): 1.3.6.1.4.1.24769.100.200.1.0
Syntax: OctetString
The value may be "Information", "Warning", 'Error" and "Unknown". "Unknown" is sent only in
the test message.

Text description of the event
Object identifier (OID): 1.3.6.1.4.1.24769.100.200.2.0
Syntax: OctetString
The value contains the text description of the event (it looks identical to messages published by
Acronis Backup & Recovery 10 in its log).
Example of varbind values:
1.3.6.1.4.1.24769.100.200.1.0:Information
1.3.6.1.4.1.24769.100.200.2.0:I0064000B
Supported operations
Acronis Backup & Recovery 10 supports only TRAP operations. It is not possible to manage Acronis
Backup & Recovery 10 using GET- and SET- requests. This means that you need to use an SNMP Trap
receiver to receive TRAP-messages.
54 Copyright © Acronis, Inc., 2000-2010